| Tipo di pagamento: | L/C,T/T |
| Incoterm: | FOB,CFR,CIF |
| Quantità di ordine minimo: | 1 Set/Sets |
| Trasporti: | Ocean,Land |
| Porta: | Dalian,Qindao |
Ombra:
marchio: Lijian
Material: Steel
Moq: 1 Set
Sertifikasi: Other
Type: Tunnel Formwork
Trattamento della superficie: Painted Or As Customer Requirement
Aplikasi: Tunnel Engineering
Tolerance: Gb Or As Customer Requirements
Design: Provided By Li Jian
| Unità vendibili | : | Set/Sets |
| Tipo pacchetto | : | Secondo la richiesta dei clienti |
The file is encrypted. Please fill in the following information to continue accessing it
Materiale impermeabile cristallino permeabile a base di cemento
Ambito dell'applicazione:
Struttura del cemento seminterrato, tunnel
|
Test Items |
GB18445-2012 |
Typical value of this product |
|
|
construction |
Add water and stir |
No Scraping and coating barrier |
No scraping and coating barrier |
|
20min |
No Scraping and coating barrier |
No scraping and coating barrier |
|
|
Wet base surface bond strength（28d） |
≥1.0MPa |
1.3MPa |
|
|
Impermeability of mortar |
Impervious pressure ratio (with coating)（28d） |
≥250% |
≥310% |
|
Impervious pressure ratio (without coating)（28d） |
≥175% |
≥233% |
|
Pechino Lijian Products Us Imports
Confronto di stati cristallini per materiali cristallini osmotici
Ambito dell'applicazione ：
È adatto per opere impermeabili in toilette interno, cucina, balcone, riscaldamento del pavimento e pavimento. Può anche essere utilizzato per la fortificazione impermeabile senza esposizione a canale
|
Test items |
GB/T23445-2009 |
Typical value of this product |
|
Solid content |
≥70% |
80% |
|
Tensile strength (without treatment) |
≥1.8MPa |
3.5MPa |
|
Elongation at break (without treatment) |
≥80% |
120% |
|
Impermeability (back surface of mortar) |
≥0.6MPa |
1.0MPa |
|
Bond strength (no treatment) |
≥0.7MPa |
1.2MPa |
|
Water tightness (0.3mpa, 30min) |
impervious |
impervious |
Effetto di riparazione della parete di infiltui a base di materiale impermeabile a base di cemento polimerico
Test di trazione del materiale impermeabile a base di cemento polimerico
Rivestimento impermeabile in poliurea ad alte prestazioni
|
Solid content/% |
100 |
tensile strength/MPa |
≥18 |
|
Gel time/s |
8~12 |
Elongation at break /% |
≥450 |
|
Tear strength/(N/mm) |
≥65 |
Density (g/cm3) |
1.02 |
|
Hardness/SHAO A |
≥80 |
Acid, alkali, salt, oil resistance |
No blistering and shedding |
|
Adhesion /(concrete,MPa) |
≥2.5 |
Mixing ratio /(volume) |
1:1 |
|
Solid content/% |
90 |
tensile strength/MPa |
≥21 |
|
Table dry time /h |
1~3 |
Elongation at break /% |
≥300 |
|
Tear strength/(N/mm) |
≥70 |
Density (g/cm3) |
1.12 |
|
Hardness/SHAO A |
≥86 |
Acid, alkali, salt, oil resistance |
No blistering and shedding |
|
Adhesion /(concrete,MPa) |
≥3.5 |
Mixing ratio /(volume) |
1.3:1 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now